Shot Blasting Machine

Product Details:

For pipe dia 15 mm to 323 mm  and length 1 m to 12 m

The machine is for blast cleaning of outer diameter of Stainless Steel Pipes of various sizes (diameters and lengths). A brief write-up on working principle of the subject machine is given below:

 

The machine consists of a blasting cabinet, diabolo roller conveyors (shape and angle setting of the diabolo type conveyor is such that it makes the pipes move linearly and rotating)  at loading and unloading side, drive units for conveyors, blast generator/reclaimer, dust collector and media recovery unit. Blasting cabinet is equipped with set of  blasting guns / nozzles, which are controlled by X-Y reciprocation manipulators, PLC and HMI system and control system.

 

The pipe to be blast cleaned  is placed on Diabolo Conveyor, which moves forward as well as rotates and reaches inside the blast chamber. There inside the blast chamber, there are two independent blasting gun stations. The pipe is exposed to the Blast Stream from set of  nozzles – Separate set of nozzles are provided on each station to do the blasting.

 

The spent blast media falls down below the cabinet and is taken to the reclaimer from the top, where heavier / reusable particles get separated and go down to the Pressure Pot / Blast Generator and then taken again to Blasting guns / Nozzles. Here at the reclaimer stage the lighter/ fine particles get sucked into the Dust Collector. The blasting machine is of continuous type and timer operated to provide continuous working of media flow from the machine . The dust created during blast cleaning is sucked by the exhaust fan mounted on pleated bag type dust collector, thus, keeping environment clean. The operator is to simply load and unload the pipes on Diabolo conveyor.

 

Two axis Reciprocation Systems of 2 sets is provided for Blast Cleaning of two pipes on two stations i.e on two Diabolos.

 

The Dust Collector with high filtration efficiency consisting of Pleated Bags has been provided to control dust pollution.

Machine has one conveyor at inlet and 2nd at outlet. A large range of Pipes ( small to big ) can be conveyed.

Linearly moving and rotating pipes enter the blast cabinet and come out at exit side after these have been cleaned by blasting.

 

We feel this type of machine may be required by you for cleaning of outer dia of pipes. If you desire any more details, please let me know.

 

Product Details:

NE’ METALLIC BARREL TYPE PRESSURE BLASTING MACHINE PB- 909090 SPL COMPLETE WITH STANDARD ACCESSORIES AS PER DRAWING No. NE/18810-07 & TECHNICAL
WORKING CHAMBER:Width 900 mmDepth 900 mmHeight 900 mmSheet Thickness 3.15 mmSLIDING DOOR (AT FRONT SIDE):Width 900 mmHeight 900 mmLocation Front SideType Vertical slidingtype withcounter weightOVERALL DIMENSIONS:Width 1350 mmDepth 2800 mmHeight 2550 mmPIT SIZE REQUIREDWidth 700 mmDepth 750 mmLength 1275 mmILLUMINATIONIllumination Lamp (Nos.of Lamps)200 W (1 No.)RUBBER LINING 3 mm.BLASTING GUN:No. of Blasting Guns 2 Nos.Blasting Nozzle Dia. 6 mm Boron CarbideBlasting Hose 19mm

Product Details:

We are the leading supplier of Portable Sandblasting Machine and provide best in industry portable sandblasting machines.

Product Details:

We manufacture a variety of Shot/ Sand and Abrasive Blast cleaning machines. Whether your application is unique or standard, we have machines that will fit your needs and your budget.
Each machine can be tailored according to your requirement and component, or job size. 
We accept operational demands and also provide guidance from expertise holders along with after sales service. Not only that but also do we maintain a ready inventory of spares, accessories, consumables, safety wear along with abrasives and blast media. 

Additional Information:

• Delivery Time: GENERALLY READY STOCK

Product Details:

We have a wide range of airless shot blast machines with several blast wheels varying according to the job size for a wide variety of workpieces for large production output in terms of surface treatment. The overhead conveyor carries the job in and out of the blast cabinet where a number of blast wheels are located depending upon the type of the job for attaining a homogeneous finish. 

Product Details:

A Complete Solution for Metal Finishing
Sand / Shot Blasting Machines - Spares - Grits, Abrasives, Steel Shots etc,
Airless Paint Spraying Equipments - Electrical & Pneumatic

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: STANDARD PACKING